Like all the elements of the PLUS system, this plate is made with high precision mechanics (built with CNC machines from aluminum block) and specially designed to enable you to easily install other mechanical components such as support rings, guide rings or dovetail clamps.

The PrimaLuceLab curved blocks can easily be installed on C11 or EdgeHD 1100 telescopes from Celestron by removing the screws on the telescope and fix the curved blocks and secure with the screws again. On the curved blocks, the 495mm PLUS Losmandy Dovetail Bar can be connected with the 2 M6 screws (included) for each curved block.

The Primaluce DX finder base is installed on AIRY refractors, allowing you to install finder supports from many brands.

The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes Hybrid-Drive focusers.

This PrimaLuceLab package is geared for astro-imagers who need auto-guiding during long astro-imaging exposures. The included items are a 60mm CompactGuide scope with Plus 80mm guide rings and QHYCCD QHY5L-II Monochrome Camera.

The PrimaLuceLab curved blocks can easily be installed on C8 or EdgeHD 800 telescopes from Celestron by removing the screws on the telescope and fix the curved blocks and secure with the screws again. On the curved blocks, the 350mm PLUS Losmandy Dovetail Bar can be connected with the 2 M6 screws (included) for each curved block.

Fully compatible with the entire PLUS line of accessories from PrimaluceLab, these tube rings have an inner diameter of 155mm. The rings are finished with beautiful and durable red anodized finish with clamshell closures and are drilled to readily accept a wide range of dovetails and other accessories. Typical telescopes with 155mm diameters are the Takahashi TOA 130 and FS 152.

The PrimaLuceLab Big Dovetail Clamp for Vixen+Losmandy PLUS is a dual saddle plate capable of accepting Vixen or Losmandy standard dovetails. The Big Dovetail Clamp was designed to carry especially heavy loads and will retain rigidity and strength for years of use. Two locking bolts hold your equipment firmly and securely in place.

The PrimaLuceLab Big Dovetail Clamp Vixen+Losmandy PLUS for SkyWatcher HEQ5 mounts is a dual saddle plate capable of accepting Vixen or Losmandy standard dovetails. The Big Dovetail Clamp was designed to carry especially heavy loads and will retain rigidity and strength for years of use. Two locking bolts hold your equipment firmly and securely in place.

The PrimaLuceLab Big Dovetail Clamp for SkyWatcher AZ-EQ5 Vixen+Losmandy PLUS is a dual saddle plate capable of accepting Vixen or Losmandy standard dovetails. The Big Dovetail Clamp was designed to carry especially heavy loads and will retain rigidity and strength for years of use. Two locking bolts hold your equipment firmly and securely in place.

The PrimaLuceLab Big Dovetail Clamp Vixen+Losmandy PLUS for SkyWatcher EQ6 or N-EQ6 mounts is a dual saddle plate capable of accepting Vixen or Losmandy standard dovetails. The Big Dovetail Clamp was designed to carry especially heavy loads and will retain rigidity and strength for years of use. Two locking bolts hold your equipment firmly and securely in place.

Use the PrimaluceLab curved riser blocks to attach to your Schmidt-Cassegrain C8, C9.25 and C11 or an aplanatic Schmidt-Cassergain EdgeHD 800, 925 or 1100 telescope by Celestron and connect a Losmandy type dovetail bar for mounting.

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors.