PLUS+ System Dovetails & Rings

Showing 1 to 20 of 42 total
Set Descending Direction
  1. PrimaLuceLab - Guide Rings PLUS 80mm

    $49.00
    SKU: PRI-PLLANGU80P

    More on the way

    If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors.

  2. PrimaLuceLab - PLUS Curved Blocks for C8, C9.25, C11, EdgeHD 800, 925 and 1100

    $49.00
    SKU: PRI-PLLSAG925

    In stock

    Use the PrimaluceLab curved riser blocks to attach to your Schmidt-Cassegrain C8, C9.25 and C11 or an aplanatic Schmidt-Cassergain EdgeHD 800, 925 or 1100 telescope by Celestron and connect a Losmandy type dovetail bar for mounting.
  3. PrimaLuceLab - Big Dovetail Clamp Vixen+Losmandy PLUS

    $119.00
    SKU: PRI-PLLMORVLPB

    4-6 Weeks

    The PrimaLuceLab Big Dovetail Clamp for Vixen+Losmandy PLUS is a dual saddle plate capable of accepting Vixen or Losmandy standard dovetails. The Big Dovetail Clamp was designed to carry especially heavy loads and will retain rigidity and strength for years of use. Two locking bolts hold your equipment firmly and securely in place.
  4. PrimaLuceLab - 155mm PLUS Support Rings

    $295.00
    SKU: PRI-PLLANSU155P

    In stock

    155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

  5. Primalucelab - DX finder base for AIRY refractors

    $29.00
    SKU: PRI-PLLBACEDX

    In stock

    The Primaluce DX finder base is installed on AIRY refractors, allowing you to install finder supports from many brands.

    The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes Hybrid-Drive focusers.

  6. PrimaLuceLab - Counterweight PLUS 1Kg

    $35.00
    SKU: PRI-PLL-CONTRPLUS

    In stock

  7. PrimaLuceLab - 100mm PLUS Support Rings

    $198.00
    SKU: PRI-PLLANSU100P

    More on the way

    The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

  8. PrimaLuceLab - 168mm PLUS Support Rings

    $315.00
    SKU: PRI-PLLANSU168P

    In stock

    The 168mm PLUS support rings are designed for AIRY APO150T apochromatic telescope (or other telescopes brands with tube approximately 168mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

  9. PrimaLuceLab - HEQ5, Sirius EQ-G PLUS Adapter Plate

    $35.00
    SKU: PRI-PLLFLHEQ5

    In stock

  10. PrimaLuceLab - Maxi Dovetail Clamp Vixen+Losmandy PLUS

    $175.00
    SKU: PRI-PLLMORVLPM

    In stock

  11. PrimaLuceLab - PLUS 10mm Spacers

    $29.00
    SKU: PRI-PLLSPES10

    In stock

    When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the PLUS system.

  12. PrimaLuceLab - PLUS 30mm Spacers

    $39.00
    SKU: PRI-PLLSPES30

    In stock

     When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others.

  13. PrimaLuceLab - Vixen Plate 350mm PLUS

    $69.00
    SKU: PRI-PLLVIX350P

    In stock

  14. PrimaLuceLab - 85mm PLUS Support Rings

    $179.00
    SKU: PRI-PLLANSU85P

    More on the way

    85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel.

  15. PrimaLuceLab - Losmandy Plate 350mm PLUS

    $109.00
    SKU: PRI-PLLLOS350P

    More on the way

    The PrimaLuceLab Losmandy Plate 350mm PLUS helps install a telescope on mounts. 350mm in length, it is useful for medium sized telescopes like refractors up to 120mm and Newton up to 250mm on mounts with a Losmandy plate.

  16. PrimaLuceLab - Counterweight PLUS 1Kg and Clamp

    $100.00
    SKU: PRI-PLL-CONTRPLUS-M

    In Stock

    The PrimaLuceLab 1 kg counterweight can easier balance the optical tubes and can be installed on both the front and rear sides of the optics of any instrument. It can optionally be mounted through a clamp to the Vixen or Losmandy support bar of the optical tube.

  17. PrimaLuceLab - 80mm PLUS Support Rings

    $135.00
    SKU: PRI-PLLANSU80P

    More on the way

    The 80mm PLUS support rings are supplied with AIRY APO65F apochromatic refractor and are also compatible with other telescope brands (for instance refractors 60-70mm in diameter) with an approximate 80mm diameter. PLUS plates can be installed either above or below OTA with the addition of these rings.

  18. PrimaLuceLab - 87mm PLUS Support Rings

    $191.99
    SKU: PRI-PLLANSU87P

    In stock

    The 87mm PLUS support rings are intended for AIRY ED72 apochromatic telescope (or other telescopes brands with tube diameter of around 87mm in measurement) to expand capabilities. Along these lines, for instance, you can install both above and underneath the optical tube the PLUS plates or even guide rings.

  19. PrimaLuceLab - 95mm PLUS Support Rings

    $190.00
    SKU: PRI-PLLANSU95P

    In stock

    The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL.

Showing 1 to 20 of 42 total
Set Descending Direction
PrimaluceLab PLUS+ system accessories are designed to work seamlessly with one another. Finished in PrimaluceLab's signature red anodized color, these accessories include dovetails, saddles, rings and brackets to make attaching your telescope and accessories to one another simple and versatile.