Miscellaneous Accessories

19 Item(s)
Set Ascending Direction
  1. PrimaLuceLab - Eagle Power Cable with Anderson Connector with 16A fuse - 250cm

    $69.99
    SKU: PRI-PL10000AND

    In stock

    In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse to avoid  polarity inversion.

  2. PrimaLuceLab - NSGen Noise Generator for Absolute Calibration

    SKU: PRI-PLLNSGEN

    Wait List

    Goal of the Gain Calibration procedure is to calibrate the noise generator by performing several Total Power measurements (using BBC filters previously defined by the user) on a set of radio sources with radio flow known from the literature. Having selected the radio sources on which to calibrate, the procedure automatically plans the slewing, at different elevations, always considering the theoretical flux in Jy. Therefore, for each radio source, these Total Power measurements will be performed:

    Call for pricing.
  • PrimaLuceLab - AC Adapter for Eagle 10AMP

    $131.99
    SKU: PRI-PL1000024

    In stock

    12V 10 amp AC power adapter for PrimaLuceLab EAGLE units designed for cooled cameras and higher power consumption systems. Screw on connection ensures your EAGLE stays plugged in.
  • PrimaLuceLab - Support for 80mm Guide Rings on Finder Base

    $84.99
    SKU: PRI-PLLSUBC

    In stock

    PrimaLuceLab - Support for 80mm Guide Rings on Finder Base
  • PrimaLuceLab - 2" Field Flattener for AIRY BLACK

    $135.99
    SKU: PRI-PLLFLATBLACK

    In stock

    The PrimaLuceLab 2" Field Flattener for AIRY BLACK is designed to produce a very large flat field and is best used with cameras with large sensors up to APS-C. This ensures pinpoint stars even at the edge of the field!

  • PrimaLuceLab - 0.8x Reducer/flattener for Refractors

    $155.99
    SKU: PRI-PLLRID08AIRY

    4-6 Weeks

    By reducing the focal length of the telescope (for instance, a 500mm focal length becomes 400mm), this 0,8x reducer/flattener increases the area caught by the camera sensor.

  • PrimaLuceLab - 0.6x Reducer/flattener for Refractors

    $208.99
    SKU: PRI-PLLRID06AIRY

    In stock

    By reducing the focal length of the telescope (for instance, a 500mm focal length becomes 300mm), this 0,6x reducer/flattener expands the area caught by the camera sensor.

    FREE SHIPPING(48 States)
  • PrimaLuceLab - DSLR Photo Adapter for ProZoom

    $155.99
    SKU: PRI-PLLPZ824-PHOTO

    In stock

    The main innovation of this eyepiece is its photographic application. It was designed together with the specific DSLR photo adapter that is screwed to the top of the eyepiece due to a corresponding thread.

  • PrimaLuceLab - 60mm CompactGuide Scope

    $193.99
    SKU: PRI-PLLCG60

    In stock

    The PrimaLuceLab 60mm CompactGuide scope serves as both a finder and guide scope!

  • PrimaLuceLab - OnAxisLock 31.8mm T2 Visual Back

    $62.99
    SKU: PRI-OAL318

    In stock

    The Primaluce OnAxisLock visual backs allow you to lock your equipment into position with a circular clamp rather than traditional holding screws, ensuring an exceptionally secure connection, a perfectly centered position and will leave your accessories scratch-free. This OnAxisLock eyepiece holder is designed to fit 31.8mm threaded telescope backs and offers a T2 connection.
  • PrimaLuceLab - OnAxisLock 50.8mm Visual Back for SC Telescopes

    $72.99
    SKU: PRI-OAL508SC

    4-6 Weeks

    The PrimaLuceLab OnAxisLock 50.8mm visual back for SC telescopes is directly screwed onto the back thread common in most Schmidt-Cassegrain telescopes (like the SC and EdgeHD by Celestron or Meade) and lets you use all the 50.8mm diameter accessories.

  • PrimaLuceLab - T2-50.8mm Photographic Adapter Long

    $26.99
    SKU: PRI-PLLADFOT2508L

    In stock

    The T2-50,8mm photographic connector long connects with all cameras and accessories that have a female T2 thread (42x0,75) and it is utilized to insert everything in the 50.8mm focusers.

  • PrimaLuceLab - Field Flattener for Doublets Refractors

    $141.99
    SKU: PRI-PLLFLAT1X

    In stock

    The field curvature is a normal effect that occurs in refractors and generates an image deformation (the stars are stretched) to the edges of the image itself.

  • PrimaLuceLab - AC Adapter for Eagle 5AMP

    $47.99
    SKU: PRI-PL1000025

    In stock

    12V 5 amp AC power adapter for PrimaLuceLab EAGLE units. Screw on connection ensures your EAGLE stays plugged in.
  • PrimaLuceLab - EQMOD USB Interface for EQ6

    $62.99
    SKU: PRI-PLLUSBEQ6

    4-6 Weeks

  • PrimaLuceLab - OnAxisLock 50.8mm Eyepiece Holder for 50.8mm Hybrid-Drive Focusers

    $83.99
    SKU: PRI-OAL508HD2

    4-6 Weeks

    OnAxisLock 50.8mm eyepiece holder for 50.8mm Hybrid-Drive focusers replaces the typical eyepiece holder present in AIRY ED72, APO80 and ED90 apochromatic refractors focusers and lets you use all the 50.8mm diameter accessories.

  • PrimaLuceLab - APO 2x Extender

    $162.99
    SKU: PRI-PLLDUPL2XAPO

    4-6 Weeks

    The 2x APO extender is inserted between the telescope and the camera, doubling the telescope's focal ratio. Utilizing this accessory the picture is magnified by 2x: for instance, a telescope with 600mm focal length will become 1200mm.

  • PrimaLuceLab - Deluxe 2.5" Field Flattener for 90T

    $291.99
    SKU: PRI-PLLFLAT1XDX25

    In stock

    The "Deluxe 2.5" field flattener for 90T" is uniquely designed specifically for the AIRY BLACK 90T apochromatic refractor to create a very large flat field for astro-imaging to use with cameras with large sensors, up to FullFrame (24x36mm). In this way, the pictures will be perfect, with pinpoint stars up to the edge of the field!

  • PrimaLuceLab - Deluxe 1x Field Flattener for Triplet Refractors

    $409.99
    SKU: PRI-PLLFLAT1XDX

    Out of Stock

    The field curvature is a normal effect that occurs in refractors and generates an image deformation (the stars are stretched) to the edges of the image itself.

    Out of stock

  • 19 Item(s)
    Set Ascending Direction